Your Cart

Barrettine’s Wood Protector is a wood sealer for rough, sawn or smooth timber. It contains water repellent resins and a biocide film wood preserver to prevent the surface growth of mould/algae and together this helps reduce decay, swelling, twisting of wood. Pigments have good UV fade resistance and will help protect wood from UV damage. 

Barrettine’s Wood Protector is an ideal treatment for outdoor Treated timber structures such as Sheds, Fences, Trellis, Pergola and timber Gazeboes. As a wood sealer it provides excellent water repellency/beading. Oil / Spirit based for deeper penetration leaving a transparent/translucent finish colour effect to wood, where the grain texture is still visible. Available in a range of colours and clear, see colour swatch below. (Not ideal for decking or garden furniture structures as rub resistance may not be sufficient).

  • UV Fade Resistant Colour Wood Stains / Pigments
  • Deep Penetrating Oil/Spirit Low Odour Formula
  • Harmless To Beneficial Insects & Plants When Dry

 

  • For use on most external pretreated timbers; (refer to tin/container).
  • Contains film biocide preserver to aid in the prevention of surface growth of mould /algae.
  • Suitable for rough, sawn or smooth timber, but not suitable for garden furniture unless oversealed.
  • Harmless to beneficial insects, plants and pets when dry.
  • Oil/Spirit-based for deeper penetration.
  • Low odour ready to use formulation.
  • Superb quality water repellent resins.
  • UV fade-resistant colour pigments. 
  • High level, long-lasting protection.
  • For unpreserved/untreated timber we recommend using Barrettine Universal Preserver first as a primer.

Application

Can be sprayed with a traditional pump action Garden style sprayer with viton seals. Protective treatment can also be sprayed using an airless sprayer (Wagner or Graco type) ideally using a minimum 1mm flat fan tip nozzle (9 – 11 thou tip). The sprayer must be thoroughly cleaned after application with white spirit and then oiled to protect the tip and moving parts (as per the manufacturer’s instructions)

  • Ensure wood to be treated is dry, free from dirt and repellent coatings such as paint or varnish. (remove and sand down as required).
  • Recommend using a biocidal wash such as Barrettine Knockout Mould and Mildew prior to treatment.
  • The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour.
  • Apply by brush, dip, roller or solvent compatible low-pressure sprayer only (not high-pressure & ensure weather conditions are dry and still).
  • Coverage: 1 litre to 6 sq metres.
  • Drying times: 24-48 hours under normal conditions.
  • Best results – recommend 2-3 applications/coats.
  • Clean equipment with Barrettine White Spirit.
  • Always read the label before use.

Check our 5 STAR RATINGS

Great customer service from the Greenford branch on two separate occasions this month. Courteous and polite and no quibbles. Well done.

ColinGreat customer service

Excellent service, very competitive prices for top quality supplies !!
Online ordering so easy !!

KelvinExcellent service

Always a good purchasing experience and excellent customer service.

AdamAlways a good purchasing experience and…

Recently Viewed Products

Request to get notified on the latest discounts and offers!!