Heating Vessel C/W Bracket & Strap-18 Heating 18L

The Heating Vessel with Bracket & Strap - 18 Liters is a versatile and reliable solution for storing and heating water in various applications. With its compact design and durable construction, this vessel is suitable for both residential and commercial heating systems.

• Altecnic offer a complete range of expansion vessels to meet the requirements of most heating or cooling systems.
• Expansion vessels for heating systems are manufactured to meet the requirements of PED 97/23/EC Directive and BS EN 13831:2007 ‘Closed expansion vessels with built in diaphragm for installation in water’.
• The two halves of the vessel and the diaphragm are retained by a crimped collar to give a pressure tight seal on all sizes.
• Non-replaceable diaphragm.
• Epoxy coated in grey.
• Suitable for flow temperatures up to 120˚C, resistant to ethylene or propylene glycol mixtures and has low gas permeability.
• Altecnic expansion vessels are all tested according to the Pressure Equipment Directive.

The vessels are fabricated by welding the various sections together which results in a very reliable structure suitable for internal pressures up to 6 bar.
Epoxy coated and available in red.
Non-replaceable diaphragm held securely in place by a flange.
Suitable for temperatures up to 100˚C, resistant to ethylene or propylene glycol mixtures and has low gas permeability.
In the event that the diaphragm within the expansion vessel could be subjected to continuous temperatures above 100˚C, the vessel must be protected by an additional vessel (VDI 6002 directive).